Ke arah penyenggaraan dan pengurusan alatan makmal yang berkesan

ανά Abas, Fuad, Megat Ahmad, Megat Mohamad Hamdan
Έκδοση 1989

An experimental study for optimization of electrical discharge turning (EDT) process

ανά Matoorian, Pouria, Sulaiman, Shamsuddin, Megat Ahmad, Megat Mohamad Hamdan
Έκδοση 2008

The effect of alkaline treatment on tensile properties of sugar palm fibre reinforced epoxy composites

ανά Bachtiar, Dandi, Salit, Mohd Sapuan, Megat Ahmad, Megat Mohamad Hamdan
Έκδοση 2008

Flexural properties of alkaline treated sugar palm fibre reinforced epoxy composites

ανά Bachtiar, Dandi, Salit, Mohd Sapuan, Megat Ahmad, Megat Mohamad Hamdan
Έκδοση 2010

Barriers to advanced manufacturing technologies implementation in the small and medium scales industries of a developing country

ανά Mohd Yusuff, Rosnah, Megat Ahmad, Megat Mohamad Hamdan, Osman, Mohd Rasid
Έκδοση 2004

Computational simulation of frontal impact of motorcycle telescopic fork

ανά Tan, Kean Sheng, Wong, Shaw Voon, Megat Ahmad, Megat Mohamad Hamdan
Έκδοση 2016

Effective factors on advanced manufacturing technology implementation performance: a review

ανά Saberi, Sara, Mohd Yusuff, Rosnah, Zulkifli, Norzima, Megat Ahmad, Megat Mohamad Hamdan
Έκδοση 2010

Numerical study of heat loss from boiler using different ratios of fibre-to-shell from palm oil wastes

ανά Mohamed, Harimi, Salit, Mohd Sapuan, Megat Ahmad, Megat Mohamad Hamdan, Abas, Fuad
Έκδοση 2008

Wind power station.

ανά Salit, Mohd Sapuan, Ismail, Napsiah, Usubamatov, Ryspek, Megat Ahmad, Megat Mohamad Hamdan
Έκδοση 2009

Value stream mapping: a tool to design the future state map aligned with lean manufacturing principles

ανά Esfandyari , Alireza, Osman, Mohd Rasid, Ismail, Napsiah, Megat Ahmad, Megat Mohamad Hamdan
Έκδοση 2006

Apparatus for machining spiral tooth of a spiral bevel gear.

ανά Salit, Mohd Sapuan, Ismail, Napsiah, Usubamatov, Ryspek, Megat Ahmad, Megat Mohamad Hamdan
Έκδοση 2005

Particular model for improving failure mode and effect analysis (FMEA) by using of overall equipment efficiency (OEE)

ανά Esmaeilian, Gholamreza, Megat Ahmad, Megat Mohamad Hamdan, Ismail, Napsiah, Sulaiman, Shamsuddin, Hamedi, Maryam
Έκδοση 2008

Theoretical analysis for calculation of the through thickness effective constants for orthotropic thick filament wound tubes.

ανά Hamed, Abdalla F., Megat Ahmad, Megat Mohamad Hamdan, Salit, Mohd Sapuan, Sahari, Barkawi
Έκδοση 2008

Theoretical stress and strain distribution across thick - walled filament wound composite.

ανά Hamed, Abdalla F., Salit, Mohd Sapuan, Megat Ahmad, Megat Mohamad Hamdan, Sahari, Barkawi
Έκδοση 2009

Internal pressure carrying capacity for different loading modes of filament-wound pipes from glass fiber-reinforced epoxy composites

ανά Hamed, Abdalla F., Salit, Mohd Sapuan, Megat Ahmad, Megat Mohamad Hamdan, Sahari, Barkawi
Έκδοση 2008

Determination of volume fraction values of filament wound glass and carbon fiber reinforced composites

ανά Abdalla, F. Hamed, Megat Ahmad, Megat Mohamad Hamdan, Salit, Mohd Sapuan, Sahari, Barkawi
Έκδοση 2008

Ground reaction force during walking with and without counterbalance load system

ανά Safikhani, Hassan, Tengku Kamalden, Tengku Fadilah, Amri, Saidon, Megat Ahmad, Megat Mohamad Hamdan
Έκδοση 2011

Stress-strain distributions through the thickness of thick walled filament wound polymer composite tube under internal pressure loading.

ανά Salit, Mohd Sapuan, Sahari, Barkawi, Abdalla, F. Hamed, Megat Ahmad, Megat Mohamad Hamdan
Έκδοση 2011

Experimental characterization of filament wound glass/epoxy and carbon/epoxy composite materials

ανά Hamed, Abdalla F., Megat Ahmad, Megat Mohamad Hamdan, Sahari, Barkawi, Salit, Mohd Sapuan
Έκδοση 2008

Development of manufacturing key performance indicators for Malaysian Small and Medium Industries (SMIS)

ανά Anuar, A., Mohd. Yusuff, Rosnah, Megat Ahmad, Megat Mohamad Hamdan, Abdul Aziz, M.
Έκδοση 2005