Ke arah penyenggaraan dan pengurusan alatan makmal yang berkesan

by Abas, Fuad, Megat Ahmad, Megat Mohamad Hamdan
Published 1989

An experimental study for optimization of electrical discharge turning (EDT) process

by Matoorian, Pouria, Sulaiman, Shamsuddin, Megat Ahmad, Megat Mohamad Hamdan
Published 2008

The effect of alkaline treatment on tensile properties of sugar palm fibre reinforced epoxy composites

by Bachtiar, Dandi, Salit, Mohd Sapuan, Megat Ahmad, Megat Mohamad Hamdan
Published 2008

Flexural properties of alkaline treated sugar palm fibre reinforced epoxy composites

by Bachtiar, Dandi, Salit, Mohd Sapuan, Megat Ahmad, Megat Mohamad Hamdan
Published 2010

Barriers to advanced manufacturing technologies implementation in the small and medium scales industries of a developing country

by Mohd Yusuff, Rosnah, Megat Ahmad, Megat Mohamad Hamdan, Osman, Mohd Rasid
Published 2004

Computational simulation of frontal impact of motorcycle telescopic fork

by Tan, Kean Sheng, Wong, Shaw Voon, Megat Ahmad, Megat Mohamad Hamdan
Published 2016

Effective factors on advanced manufacturing technology implementation performance: a review

by Saberi, Sara, Mohd Yusuff, Rosnah, Zulkifli, Norzima, Megat Ahmad, Megat Mohamad Hamdan
Published 2010

Numerical study of heat loss from boiler using different ratios of fibre-to-shell from palm oil wastes

by Mohamed, Harimi, Salit, Mohd Sapuan, Megat Ahmad, Megat Mohamad Hamdan, Abas, Fuad
Published 2008

Wind power station.

by Salit, Mohd Sapuan, Ismail, Napsiah, Usubamatov, Ryspek, Megat Ahmad, Megat Mohamad Hamdan
Published 2009

Value stream mapping: a tool to design the future state map aligned with lean manufacturing principles

by Esfandyari , Alireza, Osman, Mohd Rasid, Ismail, Napsiah, Megat Ahmad, Megat Mohamad Hamdan
Published 2006

Apparatus for machining spiral tooth of a spiral bevel gear.

by Salit, Mohd Sapuan, Ismail, Napsiah, Usubamatov, Ryspek, Megat Ahmad, Megat Mohamad Hamdan
Published 2005

Particular model for improving failure mode and effect analysis (FMEA) by using of overall equipment efficiency (OEE)

by Esmaeilian, Gholamreza, Megat Ahmad, Megat Mohamad Hamdan, Ismail, Napsiah, Sulaiman, Shamsuddin, Hamedi, Maryam
Published 2008

Theoretical analysis for calculation of the through thickness effective constants for orthotropic thick filament wound tubes.

by Hamed, Abdalla F., Megat Ahmad, Megat Mohamad Hamdan, Salit, Mohd Sapuan, Sahari, Barkawi
Published 2008

Theoretical stress and strain distribution across thick - walled filament wound composite.

by Hamed, Abdalla F., Salit, Mohd Sapuan, Megat Ahmad, Megat Mohamad Hamdan, Sahari, Barkawi
Published 2009

Internal pressure carrying capacity for different loading modes of filament-wound pipes from glass fiber-reinforced epoxy composites

by Hamed, Abdalla F., Salit, Mohd Sapuan, Megat Ahmad, Megat Mohamad Hamdan, Sahari, Barkawi
Published 2008

Determination of volume fraction values of filament wound glass and carbon fiber reinforced composites

by Abdalla, F. Hamed, Megat Ahmad, Megat Mohamad Hamdan, Salit, Mohd Sapuan, Sahari, Barkawi
Published 2008

Ground reaction force during walking with and without counterbalance load system

by Safikhani, Hassan, Tengku Kamalden, Tengku Fadilah, Amri, Saidon, Megat Ahmad, Megat Mohamad Hamdan
Published 2011

Stress-strain distributions through the thickness of thick walled filament wound polymer composite tube under internal pressure loading.

by Salit, Mohd Sapuan, Sahari, Barkawi, Abdalla, F. Hamed, Megat Ahmad, Megat Mohamad Hamdan
Published 2011

Experimental characterization of filament wound glass/epoxy and carbon/epoxy composite materials

by Hamed, Abdalla F., Megat Ahmad, Megat Mohamad Hamdan, Sahari, Barkawi, Salit, Mohd Sapuan
Published 2008

Development of manufacturing key performance indicators for Malaysian Small and Medium Industries (SMIS)

by Anuar, A., Mohd. Yusuff, Rosnah, Megat Ahmad, Megat Mohamad Hamdan, Abdul Aziz, M.
Published 2005