Ke arah penyenggaraan dan pengurusan alatan makmal yang berkesan

由 Abas, Fuad, Megat Ahmad, Megat Mohamad Hamdan
出版 1989

An experimental study for optimization of electrical discharge turning (EDT) process

由 Matoorian, Pouria, Sulaiman, Shamsuddin, Megat Ahmad, Megat Mohamad Hamdan
出版 2008

The effect of alkaline treatment on tensile properties of sugar palm fibre reinforced epoxy composites

由 Bachtiar, Dandi, Salit, Mohd Sapuan, Megat Ahmad, Megat Mohamad Hamdan
出版 2008

Flexural properties of alkaline treated sugar palm fibre reinforced epoxy composites

由 Bachtiar, Dandi, Salit, Mohd Sapuan, Megat Ahmad, Megat Mohamad Hamdan
出版 2010

Barriers to advanced manufacturing technologies implementation in the small and medium scales industries of a developing country

由 Mohd Yusuff, Rosnah, Megat Ahmad, Megat Mohamad Hamdan, Osman, Mohd Rasid
出版 2004

Computational simulation of frontal impact of motorcycle telescopic fork

由 Tan, Kean Sheng, Wong, Shaw Voon, Megat Ahmad, Megat Mohamad Hamdan
出版 2016

Effective factors on advanced manufacturing technology implementation performance: a review

由 Saberi, Sara, Mohd Yusuff, Rosnah, Zulkifli, Norzima, Megat Ahmad, Megat Mohamad Hamdan
出版 2010

Numerical study of heat loss from boiler using different ratios of fibre-to-shell from palm oil wastes

由 Mohamed, Harimi, Salit, Mohd Sapuan, Megat Ahmad, Megat Mohamad Hamdan, Abas, Fuad
出版 2008

Wind power station.

由 Salit, Mohd Sapuan, Ismail, Napsiah, Usubamatov, Ryspek, Megat Ahmad, Megat Mohamad Hamdan
出版 2009

Value stream mapping: a tool to design the future state map aligned with lean manufacturing principles

由 Esfandyari , Alireza, Osman, Mohd Rasid, Ismail, Napsiah, Megat Ahmad, Megat Mohamad Hamdan
出版 2006

Apparatus for machining spiral tooth of a spiral bevel gear.

由 Salit, Mohd Sapuan, Ismail, Napsiah, Usubamatov, Ryspek, Megat Ahmad, Megat Mohamad Hamdan
出版 2005

Particular model for improving failure mode and effect analysis (FMEA) by using of overall equipment efficiency (OEE)

由 Esmaeilian, Gholamreza, Megat Ahmad, Megat Mohamad Hamdan, Ismail, Napsiah, Sulaiman, Shamsuddin, Hamedi, Maryam
出版 2008

Theoretical analysis for calculation of the through thickness effective constants for orthotropic thick filament wound tubes.

由 Hamed, Abdalla F., Megat Ahmad, Megat Mohamad Hamdan, Salit, Mohd Sapuan, Sahari, Barkawi
出版 2008

Theoretical stress and strain distribution across thick - walled filament wound composite.

由 Hamed, Abdalla F., Salit, Mohd Sapuan, Megat Ahmad, Megat Mohamad Hamdan, Sahari, Barkawi
出版 2009

Internal pressure carrying capacity for different loading modes of filament-wound pipes from glass fiber-reinforced epoxy composites

由 Hamed, Abdalla F., Salit, Mohd Sapuan, Megat Ahmad, Megat Mohamad Hamdan, Sahari, Barkawi
出版 2008

Determination of volume fraction values of filament wound glass and carbon fiber reinforced composites

由 Abdalla, F. Hamed, Megat Ahmad, Megat Mohamad Hamdan, Salit, Mohd Sapuan, Sahari, Barkawi
出版 2008

Ground reaction force during walking with and without counterbalance load system

由 Safikhani, Hassan, Tengku Kamalden, Tengku Fadilah, Amri, Saidon, Megat Ahmad, Megat Mohamad Hamdan
出版 2011

Stress-strain distributions through the thickness of thick walled filament wound polymer composite tube under internal pressure loading.

由 Salit, Mohd Sapuan, Sahari, Barkawi, Abdalla, F. Hamed, Megat Ahmad, Megat Mohamad Hamdan
出版 2011

Experimental characterization of filament wound glass/epoxy and carbon/epoxy composite materials

由 Hamed, Abdalla F., Megat Ahmad, Megat Mohamad Hamdan, Sahari, Barkawi, Salit, Mohd Sapuan
出版 2008

Development of manufacturing key performance indicators for Malaysian Small and Medium Industries (SMIS)

由 Anuar, A., Mohd. Yusuff, Rosnah, Megat Ahmad, Megat Mohamad Hamdan, Abdul Aziz, M.
出版 2005