Fracture Mechanics of Ceramics Active Materials, Nanoscale Materials, Composites, Glass, and Fundamentals /
The 8th International Symposium on fracture mechanics of ceramics was held in on the campus of the University of Houston, Houston, TX, USA, on February 25-28, 2003. With the natural maturing of the fields of structural ceramics, this symposium focused on nano-scale materials, composites, thin films...
Đã lưu trong:
| Tác giả của công ty: | |
|---|---|
| Tác giả khác: | , , , |
| Định dạng: | Điện tử eBook |
| Ngôn ngữ: | English |
| Được phát hành: |
New York, NY :
Springer US : Imprint: Springer,
2005.
|
| Phiên bản: | 1st ed. 2005. |
| Loạt: | Fracture Mechanics of Ceramics ;
14 |
| Những chủ đề: | |
| Truy cập trực tuyến: | https://doi.org/10.1007/978-0-387-28920-5 |
| Các nhãn: |
Thêm thẻ
Không có thẻ, Là người đầu tiên thẻ bản ghi này!
|
Mục lục:
- Contact Mechanics
- Atomic Force Microscopy at Ultrasonic Frequencies
- Indentation Size Effect on the Hardness of Zirconia Polycrystals
- Indentation Fracture, Acoustic Emission and Modelling of the Mechanical Properties of Thin Ceramic Coatings
- Nanoindentation, Nanoscratch and Nanoimpact Testing of Silicon-Based Materials with Nanostructured Surfaces
- Microstructural Control of Indentation Crack Extension under Externally Applied Stress
- Instrumented Hardness Test on Alumina Ceramics and Single Crystal with Spherical Indenter
- Glass
- Controlling the Fragmentation Behavior of Stressed Glass
- Elasto-Plastic Behavior of Glassy Carbon and Silica Glass by Nano-Indentation with Spherical Tipped Indenter
- Scratch Test for Evaluation of Surface Damage in Glass
- Shear Driven Damage and Internal Friction in Indentation Loading of a Glass-Ceramic
- Indentation and Scratching of Glass: Load, Composition and Temperature Effects
- Effects of Tin on the Physical Properties and Crack Growth in Soda-Lime-Silica Float Glass
- Indentation Size Effect for Glasses: Yes, There is a Fracture Contribution
- Fracture of Nano-Scale Materials
- Slow Crack Propagation in Ceramics at the Nano- and Micro-Scale: Effect of the Microstructure
- Toughening and Strengthening Mechanisms in Nanocomposites Based on Dislocation Activity
- Composites
- Creep Behavior and Mechanism for CMCs with Continuous Ceramic Fibers
- Strain Accumulation and Damage Evolution During Creep of SiCf/SiC Composites
- Modelling Multilayer Damage in Cross-ply Ceramic Matrix Composites
- Quantification of Toughness Increase Due to Metal Particles in Glass Matrix Composites
- Fracture Resistance of Hybrid Glass Matrix Composite and Its Degradation Due to Thermal Ageing and Thermal Shock
- Creep Investigation of SiCf-SiBC Composites
- Fracture Toughness of BaTiO3-MgO Composites Sintered by Spark Plasma Sintering
- Fracture Toughness of BaTiO3 and BaTiO3-Al2O3 Composite under Electric Field
- Room Temperature Post-Fracture Tensile (PFT) Study of Two Fiber-Reinforced Ceramic Matrix Composites with a “Strong” Fiber/Matrix Interface
- A FE Model of Carbon/Carbon Composite Fracture
- Fracture Fundamentals
- Tailoring the Composition of Self-Reinforced Silicon Nitride Ceramics to Enhance Mechanical Behavior
- Nonlinear Fracture of a Polycrystalline Graphite — Size-Effect Law and Irwin’s Similarity
- Fragmentation of Ceramics in Rapid Expansion Mode
- Experimental Approach to Microfracture Process of Ceramics under Thermal Shock
- Finite Element Analysis of Crack-Path Selection in a Brick and Mortar Structure
- Investigation of Crack Growth Process in Dense Hydroxyapatite Using the Double Torsion Method
- Crack Propagation Behavior of Alumina with Different Grain Sizes under Static and Cyclic Fatigue
- Effects of Pore/Grain-Size Interaction and Porosity on the Fracture of Electroceramics
- Fracture of Coatings
- Fracture Behaviour of Plasma Sprayed Thermal Barrier Coatings
- Particle Impact Damage and Point Load-Induced Fracture Behavior in Zirconia Plasma Spray Coating Film
- Model I, Mode II, and Mixed-Mode Fracture of Plasma-Sprayed Thermal Barrier Coatings at Ambient and Elevated Temperatures
- Ferroelectric Materials
- Modeling of Fracture in Ferroelastic Ceramics
- Strength and Reliability of Lead Zirconate Titanate Ceramics
- Reliability Prediction, Standardization and Design
- Standard Reference Material 2100: Fracture Toughness of Ceramics
- Measuring the Real Fracture Toughness of Ceramics: ASTM C 1421
- Predicting the Reliability of Brittle Material Structures Subjected to Transient Proof Test and Service Loading
- Estimation and Simulation of Slow Crack Growth Parameters from Constant Stress Rate Data
- On Integrity of Flexible Displays
- Fracture of Conductive Cracks in Poled and Depoled PZT-4 Ceramics
- Increasing Resistance to Low Temperature Ageing Degradation of Y-TZP by Surface Modification.