Topics in Experimental Dynamics Substructuring and Wind Turbine Dynamics, Volume 2 Proceedings of the 30th IMAC, A Conference on Structural Dynamics, 2012 /
Topics in Experimental Dynamics Substructuring and Wind Turbine Dynamics, Volume 2, Proceedings of the 30th IMAC, A Conference and Exposition on Structural Dynamics, 2012, the second volume of six from the Conference, brings together 31 contributions to this important area of research and engineeri...
محفوظ في:
| مؤلف مشترك: | |
|---|---|
| مؤلفون آخرون: | , , , , , , |
| التنسيق: | الكتروني كتاب الكتروني |
| اللغة: | English |
| منشور في: |
New York, NY :
Springer New York : Imprint: Springer,
2012.
|
| الطبعة: | 1st ed. 2012. |
| سلاسل: | Conference Proceedings of the Society for Experimental Mechanics Series,
27 |
| الموضوعات: | |
| الوصول للمادة أونلاين: | https://doi.org/10.1007/978-1-4614-2422-2 |
| الوسوم: |
إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
|
جدول المحتويات:
- Tutorial on Experimental Dynamic Substructuring Using the Transmission Simulator Method
- Experimental-analytical Substructure Model Sensitivity Analysis for Cutting Machine Chatter Prediction
- Eliminating Indefinite Mass Matrices With the Transmission Simulator Method of Substructuring
- Using Substructuring to Predict the Human Hand Influence on a Mechanical Structure Simple Experiments to Validate Modal Substructure Models
- Experimental Realization of System-Level Vibration by Use of Single Component Based on Virtual Boundary Condition Concept
- An Introduction to the SEM Substructures Focus Group Test Bed - The Ampair 600 Wind Turbine
- Modal Assessment of Wind Turbine Blade in Preparation of Experimental Substructuring
- Comparison of Some Wind Turbine Blade Tests in Various Configurations
- Consideration of Interface Damping in Dynamic Substructuring
- Direct Hybrid Formulation for Substructure Decoupling
- Substructuring with Nonlinear Subcomponents: A Nonlinear Normal Mode Perspective
- An Effective Method for Assembling Impulse Response Functions to Linear and Non-linear Finite Element Models
- Truncating the Impulse Responses of Substructures to Speed Up the Impulse-based Substructuring
- Application of Residual Vectors to Superelement Modeling of an Offshore Wind Turbine Foundation
- Demonstrating Predictive Capability of Validated Wind Turbine Blade Models
- Towards the Experimental Assessment of NLBeam for Modeling Large Deformation Structural Dynamics
- Wind Turbine Experimental Dynamic Substructure Development
- Validation of a Finite Element Model Used for Dynamic Stress-strain Prediction
- Dynamic Stress-strain on Turbine Blade using Digital Image Correlation Techniques Part 1 - Static Load and Calibration
- Dynamic Stress-Strain on Turbine Blade Using Digital Image Correlation Techniques Part 2 - Dynamic Measurements
- Structural Health Monitoring of Wind Turbine Blades under Fatigue Loads
- Dynamic Characterization of Whisper 500 Turbine Blade
- Developing a Finite Element Model in Conjunction With Modal Test for Wind Turbine Blade Models
- Dynamic Stress-strain Prediction from Limited Measurements in the Presence of Structural Defects
- On the Mode Based Simulation of Dry Friction Inside Lap Joints
- Efficient Updating of Static Modes in the Craig-Bampton Reduction Basis
- Comparison of CMS, Krylov and Balanced Truncation-based Model Reduction from a Mechanical Application Engineer’s Perspective
- Vertical Axis Wind Turbine Operational Modal Analysis in Sheared Wind Flow
- Output-only Estimation of Wind Induced Stresses in Structures
- Modal Testing of 9m CX-100 Turbine Blades.