Bifurcations, Instabilities and Degradations in Geomaterials
Geomaterials exhibit complex but rich mechanical behaviour with a variety of failure modes ranging from diffuse to localized deformation depending on stress, density, microstructure, and loading conditions. These failure modes are a result of an instability of material and/or geometric nature that c...
Tallennettuna:
| Yhteisötekijä: | |
|---|---|
| Muut tekijät: | , , |
| Aineistotyyppi: | Elektroninen E-kirja |
| Kieli: | English |
| Julkaistu: |
Berlin, Heidelberg :
Springer Berlin Heidelberg : Imprint: Springer,
2011.
|
| Painos: | 1st ed. 2011. |
| Sarja: | Springer Series in Geomechanics and Geoengineering,
|
| Aiheet: | |
| Linkit: | https://doi.org/10.1007/978-3-642-18284-6 |
| Tagit: |
Lisää tagi
Ei tageja, Lisää ensimmäinen tagi!
|
Sisällysluettelo:
- Failure in granular materials: macro and micro views
- Instability in Loose Sand: Experimental Results and Numerical Simulations with a Microstructural Model.-Failure in granular materials in relation to material instability, fabric and plastic flow issues.-Loss of controllability in partially saturated soils
- Critical plane approach to analysis of failure criteria for anisotropic geomaterials.-A simple method to consider density and bonding effects in modeling of geomaterials.-Cyclic mobility of sand and its simulation in boundary value problems.-An updated hypoplastic constitutive model, its implementation and application
- A Chemo-Thermo-Mechanically Coupled Analysis of Ground Deformation Induced by Methane Hydrate Dissociation.-Model for Pore-Fluid Induced Degradation of Soft Rocks.-Natural Processes and Strength Degradation.-Local behavior of pore water pressure during plane-strain compression of soft rock
- FE investigations of dynamic shear localization in granular bodies within non-local hypoplasticity using ALE formulation.-Concurrent multiscale computational modeling for dense dry granular materials interfacing deformable solid bodies.-Performance of SPH method for deformation analyses of geomaterials.-CIP-based Numerical Simulation of Snow Avalanche
- A Mesh Free Method to Simulate Earthmoving Operations In Fine-Grain Cohesive Soils.-Analysis of deformation and damage processes in soil-tool interaction problems.-Modeling Excavator-Soil Interactions.