Improvement of engine performance of a single-cylinder compression ignition engine using 3D-printed helical thread intake manifold

por Hairuddin, Abdul Aziz, Shafanejad, Mohammed Amin
Publicado em 2018

A homogeneous charge compression ignition engine: an introduction

por Hairuddin, Abdul Aziz, Wandel, Andrew P., Yusaf, Talal
Publicado em 2013

A review of hydrogen and natural gas addition in diesel HCCI engines

por Hairuddin, Abdul Aziz, Yusaf, Talal, Wandel, Andrew P.
Publicado em 2014

Single-zone zero-dimensional model study for diesel-fuelled homogeneous charge compression ignition (HCCI) engines using Cantera

por Hairuddin, Abdul Aziz, Yusaf, Talal, Wandel, Andrew P.
Publicado em 2016

An introduction to a homogeneous charge compression ignition engine

por Hairuddin, Abdul Aziz, Wandel, Andrew P., Yusaf, Talal
Publicado em 2014

Effect of fuel injection strategies on performance and emissions in HCCI engines: a review

por Aljaberi, Hassan A., Hairuddin, Abdul Aziz, Abdul Aziz, Nuraini
Publicado em 2018

Diesel and various blending nanoparticles based diesel, fuel properties study

por M., Norhafana, M. M., Noor, F. Y., Hagos, Hairuddin, Abdul Aziz
Publicado em 2020

Developing sub-bituminous coal sintering ratio for predicting coal ash slagging factors

por Samsudin, Salmi, Abdul Aziz, Nuraini, Hairuddin, Abdul Aziz, Masuri, Siti Ujila
Publicado em 2021

The performance of a single-cylinder diesel engine fuelled with egusi based biodiesel

por Hairuddin, Abdul Aziz, M. Tobib, Hasyuzariza, Zulkifli, Fariza, M. Noor, Muhamad
Publicado em 2019

A study on bituminous coal base acid ratio to the slagging factor at large scale boiler

por Samsudin, Salmi, Abdul Aziz, Nuraini, Hairuddin, Abdul Aziz, Masuri, Siti Ujila
Publicado em 2021

Computational fluid dynamics investigation of air-gas pre mixing controller mixer designed for CNG-diesel dual-fuel engines

por Masuri, Siti Ujila, Hairuddin, Abdul Aziz, Muhssen, Hassan Sadah, Sahari, Barkawi
Publicado em 2019

Review of the grey wolf optimization algorithm: variants and applications

por Liu, Yunyun, As’arry, Azizan, Hassan, Mohd Khair, Hairuddin, Abdul Aziz
Publicado em 2023

Design and fabrication of a heat exchanger for portable solar water distiller system

por Abduhamed, A. J., Adam, Nor Mariah, Hairuddin, Abdul Aziz, Kareem, H. K.
Publicado em 2016

Review of the grey wolf optimization algorithm: variants and applications

por Liu, Yunyun, As’arry, Azizan, Hassan, Mohd Khair, Hairuddin, Abdul Aziz, Mohamad, Hesham
Publicado em 2024

Recent trends in biodiesel production from commonly used animal fats

por Alajmi, Fnyees S. M. D. A., Hairuddin, Abdul Aziz, Adam, Nor Mariah, Abdullah, Luqman Chuah
Publicado em 2018

Review of solar parabolic-trough collector geometrical and thermal analyses, performance, and applications

por JaberAbdulhamed, Ali, Adam, Nor Mariah, Ab Kadir, Mohd Zainal Abidin, Hairuddin, Abdul Aziz
Publicado em 2018

Flow and thermal mechanisms in receiver tube of parabolic trough collectors with rings axially connected together and radially connected to the inner tube surface

por Abdulhamed, Ali Jaber, Adam, Nor Mariah, Ab. Kadir, Mohd. Zainal Abidin, Hairuddin, Abdul Aziz
Publicado em 2020

Numerical investigation of lamella heat exchanger for engine intake charge air cooling utilizing refrigerant as coolant medium

por Ikhtiar, Usman, Hairuddin, Abdul Aziz, Asarry, Azizan, Md Rezali, Khairil Anas, Muhammad Ali, Hafiz
Publicado em 2022

Effects of hot exhaust gas recirculation (EGR) on the emission and performance of a single-cylinder diesel engine

por Mossa, Muntasser Abdulabbas, Hairuddin, Abdul Aziz, Abdul Aziz, Nuraini, Jamal, Zulkiple, Muhamad Tobib, Hasyuzariza
Publicado em 2019

Augmented reality: capabilities and challenges in machining industry aligned with industry 4.0

por Abdul Rani, Nadia, Abdul Aziz, Faieza, Hairuddin, Abdul Aziz, Ahmad, Siti Azfanizam, Hemdi, Abdul Rahman
Publicado em 2020