Numerical modeling of ballistic impact and penetration: computational aspects and challenges

by Talebi, Hossein, Hamouda, Abdel Magid Salem
Published 2005

Advanced materials and nanotechnology

by Idris, Jamaliah, Hamouda, Abdel Magid Salem
Published 2000

Finite element modelling of casting process

by Sulaiman, Shamsuddin, Hamouda, Abdel Magid Salem
Published 1999

Development of an integrated CAD/CAE/CAM system for forging process: a proposal

by Abdullah, Ahmad Baharuddin, Hamouda, Abdel Magid Salem
Published 2005

Development of virtual classroom for interactive education on the web

by Hamouda, Abdel Magid Salem, Tan, Jo Pei
Published 2000

On the thermoelastic functionally graded material of ceramic-metal plate

by Bayat, Mehdi, Hamouda, Abdel Magid Salem, Mahdi , E.
Published 2005

Fast upsetting of circular cylinders of aluminium metal matrix composites: experimental results and numerical analysis

by Hamouda, Abdel Magid Salem, Sulaiman, Shamsuddin, Hashmi, M. S. J.
Published 1996

Virtual reality as a training tool in engineering education

by Arshad, Haslina, Hamouda, Abdel Magid Salem, Ismail, Napsiah, Sulaiman, Riza
Published 2008

Manufacturing process planning optimisation in reconfigurable multiple parts flow lines

by Ismail, Napsiah, Musharavati, Farayi, Hamouda, Abdel Magid Salem, Ramli, Abdul Rahman
Published 2008

A metaheuristic approach to manufacturing process planning in reconfigurable manufacturing systems

by Musharavati, Farayi, Ismail, Napsiah, S. Hamouda, Abdel Magid Salem, Ramli, Abdul Rahman
Published 2008

An analytical hierarchical process approach for evaluating configuration performance in reconfigurable manufacturing systems

by Musharavati, F., Ismail, Napsiah, Hamouda, Abdel Magid Salem, Ramli, Abdul Rahman
Published 2005

A neural network based control strategy for reconfigurable manufacturing systems

by Musharavati, Farayi, Ismail, Napsiah, Hamouda, Abdel Magid Salem, Ramli, Abd. Rahman
Published 2005

Mechanical and thermal stresses in a functionally graded rotating disk with variable thickness due to radially symmetry loads.

by Bayat, Mehdi, Saleem, Muhammad, Sahari, Barkawi, Hamouda, Abdel Magid Salem, Mahdi, Elsadig
Published 2009

Edgewise compression of composite sandwich panels: effect of core hybridization

by Tarlochan, Faris, Hamouda, Abdel Magid Salem, Sahari, Barkawi, Saad, Elsadig Mahdi Ahmed
Published 2005

Complex parts surface modelling from laser scanning data

by Abd Manaf, Ismanizam, Ismail, Napsiah, Hamouda, Abdel Magid Salem, Wong, Shaw Voon
Published 2005

Microscopic study of 5083-H321 aluminium alloy under fretting fatigue condition

by Eslamian, Saeed, Sahari, Barkawi, Ali, Aidy, Mahdi, Elsadig, Hamouda, Abdel Magid Salem
Published 2011

Trajectory tracking for a serial robot manipulator passing through singular configurations based on the adaptive kinematics Jacobian method

by Hasan, Ali T., Hamouda, Abdel Magid Salem, Ismail, Napsiah, Aris, Ishak, Marhaban, Mohammad Hamiruce
Published 2009

Simulation of motorcyclist's kinematics during impact with W-Beam guardrail

by Biliyamin, Ibitoye Adeoye, Hamouda, Abdel Magid Salem, Wong, Shaw Voon, Radin Sohadi, Radin Umar
Published 2006

Thermo elastic analysis of functionally graded rotating disks with temperature-dependent material properties: uniform and variable thickness

by Bayat, Mehdi, Sahari, Barkawi, Saleem, Muhammad Azhar, Hamouda, Abdel Magid Salem, Reddy, Junuthula N.
Published 2009

The combined effect of Al-5Ti-1B and Al-10Sr on the metallurgical properties of LM6 Al-Si sand castings

by Lim, Y. P., Sulaiman, Shamsuddin, Hamouda, Abdel Magid Salem, Megat Ahmad, Megat Mohamad Hamdan
Published 2005