Adsorption potential of kenaf for copper and nickel removal from aqueous solution /
Heavy metal pollution is one of the environmental issues that become a concern due to their toxic effect to environment and human health. Adsorption has been widely used to remove heavy metals from industrial wastewater. Therefore, there is a need to explore new sources of an alternative and inexpen...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis Book |
| Language: | English |
| Published: |
2010.
|
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Heavy metal pollution is one of the environmental issues that become a concern due to their toxic effect to environment and human health. Adsorption has been widely used to remove heavy metals from industrial wastewater. Therefore, there is a need to explore new sources of an alternative and inexpensive adsorbent for elimination of heavy metals. In this study, a series of batch experiment was conducted to study the adsorption potential of kenaf as a biosorbent for Cu (II) and Ni (II) removal from aqueous solutions. The specific objectives are to obtain adsorption isotherms, kinetics determination, and measure the adsorption capacity in batch and fixed bed column system. The single adsorption isotherm and kinetics were carried out at a constant temperature of 30+1°C using an incubator shaker operated at 200 rpm. Some of the parameters that affect the adsorption process such as pH, initial concentration of adsorbate, adsorbent dosage and contact time was determined. The column study experiment was conducted with 100 mg/L of individual heavy metal solution. The effect of bed depth was examined with a flow rate of 6 mL/min and different bed depths of 15, 20, 25 and 30 cm to obtain the adsorption capacity and exhaustion time by evaluating the breakthrough curves. Also, to determine the effect of different flow rates, the column study experiment was conducted at a constant bed depth (20 cm) with different flow rates of 4, 6, and 9 mL/min. The optimum pH was observed to be at pH 5.0 and 6.0 for Cu (II) and Ni (II), respectively. The equilibrium time of Cu (II) was determined at 3 hours and for Ni (II) was at 4.5 hours. The single component equilibrium of each metal was analyzed using the Langmuir and Freundlich models. Langmuir isotherm model showed rather better fit for Cu (II) adsorption based on the correlation coefficient (R2) values. As for Ni (II) adsorption, Freundlich isotherm model showed the better fit. The pseudo first-order and pseudo second-order models were used to describe adsorption kinetics of Cu (II) and Ni (II), respectively. The adsorption kinetics of these metal ions onto kenaf followed pseudo second-order model assuming chemisorptions mechanisms. The bed depth service time model (BDST) fitted well with experimental data due to the effect of bed depth. Thomas model also described well the adsorption parameters to determine the effect of flow rate on adsorption capacity and breakthrough curves. |
|---|---|
| Physical Description: | 105 leaves : ill. ; 30cm. |