Omslagsbillede

Modeling and simulation of forward Al extrusion process using FEM

The main objective of this paper is to study the effect of extrusion parameters (extrusion stresses and temperature) and die geometry, i.e. extrusion radius, on the extruded aluminum quality using FEM Simulation Technique. For this purpose, the general FEA Software ABAQUS was used to set up the fini...

Fuld beskrivelse

Saved in:

Bibliografiske detaljer
Main Authors:	Magid, Hani Mizhir, Sulaiman, Shamsuddin, Mohd Ariffin, Mohd Khairol Anuar, Baharudin, B. T. Hang Tuah
Format:	Article
Sprog:	English
Udgivet:	Trans Tech Publications 2014
Online adgang:	http://psasir.upm.edu.my/id/eprint/34544/1/Modeling%20and%20simulation%20of%20forward%20Al%20extrusion%20process%20using%20FEM.pdf
Tags:	Tilføj Tag Ingen Tags, Vær først til at tagge denne postø!

Lignende værker

Modelling and simulation of hollow profile aluminium extruded product
af: Sulaiman, Shamsuddin, et al.
Udgivet: (2015)

Enhancement and improvement of the mechanical properties of aluminum extruded products by mathematical analysis and simulation process
af: Magid, Hani Mizhir, et al.
Udgivet: (2014)

Microhardness characteristics of AL-6063 alloy processed by equal channel angular extrusion
af: Nemati, Jamshid, et al.
Udgivet: (2014)

Pre-emptive resource-constrained multimode project scheduling using genetic algorithm: a dynamic forward approach
af: Delgoshaei, Aidin, et al.
Udgivet: (2016)

$Development of microstructure and fracture toughness of AL-6063 alloy using equal channel angular extrusion$

Development of microstructure and fracture toughness of AL-6063 alloy using equal channel angular extrusion
af: Nemati, Jamshid, et al.
Udgivet: (2014)

Finite element study of deformation behaviour of Al- 6063 alloy developed by equal channel angular extrusion
af: Nemati, Jamshid, et al.
Udgivet: (2014)

Effect of equal channel angular extrusion on fatigue life of pure copper.
af: Sulaiman, Shamsuddin, et al.
Udgivet: (2013)

Plates and FEM Surprises and Pitfalls /
af: Blaauwendraad, Johan., et al.
Udgivet: (2010)

Simulation of thermoset injection for bulk moulding compounds (BMC)
af: Mohd Ariffin, Mohd Khairol Anuar, et al.
Udgivet: (2011)

FEMS microbiology ecology

FEMS microbiology letters

FEMS microbiology reviews

FEMS yeast research
Udgivet: (2001)

Extrusion of unleavened bread dough: experiments and simulations
af: P. Mohammed, Mohd Afandi, et al.
Udgivet: (2017)

The influence of mechanical mold vibration on temperature distribution and physical properties of Al-11.8%Si matrix composites
af: Sayuti, M., et al.
Udgivet: (2012)

Design and simulation on investment casting mold for metal matrix composite material
af: Sahroni, Taufik Roni, et al.
Udgivet: (2011)

The influence of mechanical vibration moulding process on thermal conductivity and diffusivity of Al-TiC particulate reinforced composites
af: Mohd Sayuti,, et al.
Udgivet: (2011)

Computer simulation and experimental investigation of solidification casting process
af: Sulaiman, Suraya, et al.
Udgivet: (2011)

FEM Lancar 29 Buku.
af: Universiti Putra Malaysia, Bahagian Komunikasi Korporat
Udgivet: (2009)

FEM and micromechatronics with ATILA software /
af: Uchino, Kenji, 1950-.
Udgivet: (2008)

Extrusion in Ceramics
Udgivet: (2007)

Understanding extrusion /
af: Rauwendaal, Chris.
Udgivet: (1998)

Understanding extrusion /
af: Rauwendaal, Chris.
Udgivet: (1998)

Durability simulation of elastomeric materials using finite element method (FEM)
af: Chieh, C. W., et al.
Udgivet: (2010)

Simulation of open-ended coaxial sensor by finite element method (FEM)
af: Abbas, Zulkifly, et al.
Udgivet: (2009)

Durability simulation of elastomeric materials using finite element method (FEM)
af: Chieh, C. W., et al.
Udgivet: (2009)

Processing and characterisation of particulate reinforced aluminium -11.8% silicon matrix composite
af: M., Sayuti, et al.
Udgivet: (2010)

Process parameters for cylindrical deep drawing components
af: Sulaiman, Shamsuddin, et al.
Udgivet: (2015)

Die system design with finite element for improving mechanical performance of extruded aluminium alloys and composites
af: Al-Jaryawy, Hani Mizhir Magid
Udgivet: (2015)

Die system design with finite element for improving mechanical performance of extruded aluminium alloys and composites
af: Al-Jaryawy, Hani Mizhir Magid
Udgivet: (2015)

Die system design with finite element for improving mechanical performance of extruded aluminium alloys and composites /
af: Al-Jaryawy, Hani Mizhir Magid.

Metal matrix composite products by vibration casting method
af: Sayuti, M., et al.
Udgivet: (2016)

Extrusion cooking : technologies and applications /
Udgivet: (2001)

Extrusion of polymers : theory and practice /
af: Chung, Chan I.
Udgivet: (2000)

CAD/CAM & FEM in metal working /
Udgivet: (1988)

Plastic made gasing top
af: Sulaiman, Shamsuddin, et al.
Udgivet: (2012)

EFVD along porcelain insulator using the FEM
af: Ho, Kian Tsong, et al.
Udgivet: (2017)

Paste flow and extrusion /
af: Benbow, John.
Udgivet: (1993)

Extrusion of biodegradable foam /
af: Dan, Ben-Daat.

Principles of plastics extrusion
af: Brydson, John Andrew.
Udgivet: (1973)