Beeld op de omslag

Optimization and modeling of the performance of polydimethylsiloxane for pervaporation of ethanol−water mixture

Response surface methodology was used to optimize the performance of pervaporation of ethanol aqueous solution using polydimethylsiloxane hollow-fiber membrane. The effects of four operating conditions, that is, the feed temperature (30–50°C), the feed flow rate (10–50 L/h), ethanol concentration (5...

Volledige beschrijving

Bewaard in:

Bibliografische gegevens
Hoofdauteurs:	Zentou, Hamid, Zainal Abidin, Zurina, Yunus, Robiah, Awang Biak, Dayang Radiah, Issa, Mohammed Abdullah
Formaat:	Artikel
Gepubliceerd in:	John Wiley & Sons 2020
Tags:	Voeg label toe Geen labels, Wees de eerste die dit record labelt!

Gelijkaardige items

Modelling of mass transfer during pervaporation of ethanol/water mixture using polydimethylsiloxane membrane
door: Zentou, Hamid, et al.
Gepubliceerd in: (2021)

Development of an integrated fermentation pervaporation model for bioethanol production
door: Hamid, Zentou
Gepubliceerd in: (2021)

Development of an integrated fermentation pervaporation model for bioethanol production
door: Hamid, Zentou
Gepubliceerd in: (2021)

Development of an integrated fermentation pervaporation model for bioethanol production /
door: Hamid, Zentou,

Overview of alternative ethanol removal techniques for enhancing bioethanol recovery from fermentation broth
door: Zentou, Hamid, et al.
Gepubliceerd in: (2019)

Dielectric characterization of ethanol and sugar aqueous solutions for potential halal authentication
door: Zainal Abidin, Zurina, et al.
Gepubliceerd in: (2014)

A new model of alcoholic fermentation under a byproduct inhibitory effect
door: Zentou, Hamid, et al.
Gepubliceerd in: (2021)

Mathematical modelling of subcritical water extraction of essential oil from Aquilaria Malacenssis wood
door: Zainal Abidin, Zurina, et al.
Gepubliceerd in: (2023)

Modelling of molasses fermentation for bioethanol production: a comparative investigation of Monod and Andrews models accuracy assessment
door: Zentou, Hamid, et al.
Gepubliceerd in: (2019)

Pervaporation process of coffee volatile compounds with PDMS membrane
door: Hernandes, E. E., et al.
Gepubliceerd in: (2023)

Effect of physical pretreatment on dilute acid hydrolysis of water hyacinth (Eichhornia crassipes).
door: Awang Biak, Dayang Radiah, et al.
Gepubliceerd in: (2011)

Mathematical modelling of extraction of oil from Aquilaria malacenssis wood employing subcritical conditions
door: Zainal Abidin, Zurina, et al.
Gepubliceerd in: (2024)

Determination of ethanol concentration of ethanol/water mixture solutions with open ended coaxial method
door: Khalid, Norashikin, et al.
Gepubliceerd in: (2016)

Determination of ethanol concentration of ethanol/water mixture solutions with open ended coaxial method
door: Khalid, Norashikin, et al.
Gepubliceerd in: (2016)

Optimal Mixture Experiments
door: Sinha, B.K., et al.
Gepubliceerd in: (2014)

Coagulant agent for water treatment.
door: Zainal Abidin, Zurina, et al.
Gepubliceerd in: (2011)

Optimization process of spin-coated black phosphorus/polydimethylsiloxane composite on microfiber as saturable absorber for ultrafast photonics
door: Ng, E.K., et al.
Gepubliceerd in: (2023)

Effect of polydimethylsiloxane (PDMS) coating on the behavior of Shape Memory Alloy (SMA) actuator
door: Awang Jumat, Nurkhairunisa, et al.
Gepubliceerd in: (2019)

Effect of heating time and temperature to the dielectric properties of pork and chicken in the range of 0.5 – 50 GHz
door: Zainal Abidin, Zurina, et al.
Gepubliceerd in: (2017)

Efficient removal of Cu(II) from aqueous systems using enhanced quantum yield nitrogen-doped carbon nanodots
door: Issa, Mohammed Abdullah, et al.
Gepubliceerd in: (2020)

Effect of retention time on biohydrogen production by microbial consortia immbolised in polydimethylsiloxane
door: Ismail, Isnazunita, et al.
Gepubliceerd in: (2011)

Factors affecting dielectrophoretic separation of cells using high gradient electric field strength system
door: Zainal Abidin, Zurina, et al.
Gepubliceerd in: (2008)

Extraction of oil from jatropha seeds-optimization and kinetics
door: Sayyar, Sepidar, et al.
Gepubliceerd in: (2009)

Assessing the kinetic model of hydro-distillation and chemical composition of Aquilaria malaccensis leaves essential oil
door: Samadi, Mahtab, et al.
Gepubliceerd in: (2017)

Noise-like pulse generation with tungsten trioxide/polydimethylsiloxane-clad microfiber saturable absorber
door: Abdul Hadi, Muhamad Amir Waliuddin, et al.
Gepubliceerd in: (2022)

Fabrication and characterization of carbon nanotubes/polydimethylsiloxane nanocomposite for low piezoresistive pressure sensor
door: Azhari, Saman
Gepubliceerd in: (2016)

Fabrication and characterization of carbon nanotubes/polydimethylsiloxane nanocomposite for low piezoresistive pressure sensor
door: Azhari, Saman
Gepubliceerd in: (2016)

Fabrication and characterization of carbon nanotubes/polydimethylsiloxane nanocomposite for low piezoresistive pressure sensor /
door: Azhari, Saman.
Gepubliceerd in: (2016)

Dissolution of condensed tannin powder-based polyphenolic compound in water-glycerol-acid solution
door: Kamarudin, Nuruldiyanah, et al.
Gepubliceerd in: (2021)

Stirring time effect of silver nanoparticles prepared in glutathione mediated by green methods
door: Balavandy, Sepideh Keshan, et al.
Gepubliceerd in: (2014)

Dielectric effects of bacterial cellulose (BC) impregnated with in-house synthesized carbon nanotubes (CNTs)
door: Adnan, Sharmeen, et al.
Gepubliceerd in: (2010)

Effect of ultrasonic pre-treatment on low temperature acid hydrolysis of oil palm empty fruit bunch
door: Yunus, Robiah, et al.
Gepubliceerd in: (2010)

Aluminum oxide/polydimethylsiloxane-based Q-switched mode-locked erbium-doped fiber laser
door: Mohd Yusoff, N., et al.
Gepubliceerd in: (2022)

Epoxidation of jatropha methyl esters via acidic ion exchange resin: optimization and characterization
door: Derahman, Aishah, et al.
Gepubliceerd in: (2019)

Hydrophobic and fire-resistant Polydimethylsiloxane/ZIF-8 hybrid coating on cotton textile for efficient oil-water separation
door: Sooriyanarayanan, Vikneswary, et al.
Gepubliceerd in: (2024)

Evaluation of radiation attenuation properties on a various composition of polydimethylsiloxane (PDMS) for fabrication of kidney phantom
door: Kamal, Izdihar, et al.
Gepubliceerd in: (2021)

Optimization of hydrocortisone-loaded nanoemulsion formulation using d-optimal mixture design
door: Kong, W. Y., et al.
Gepubliceerd in: (2018)

Mechanical and imaging properties of a clinical-grade kidney phantom based on polydimethylsiloxane and elastomer
door: Kamal, Izdihar, et al.
Gepubliceerd in: (2022)

Black phosphorus/polydimethylsiloxane coated microfiber saturable absorber for ultrashort pulse fiber laser
door: Ng, Eng Khoon
Gepubliceerd in: (2021)

Black phosphorus/polydimethylsiloxane coated microfiber saturable absorber for ultrashort pulse fiber laser
door: Ng, Eng Khoon
Gepubliceerd in: (2021)